Skip to main content

U.S. Navy Prepares 600-Ton Hypersonic Launch Module for Second Zumwalt Destroyer.


The U.S. Navy is preparing another phase of modernization for USS Michael Monsoor (DDG-1001), the second Zumwalt-class destroyer, with plans to install a hypersonic missile launch module weighing approximately 600 tons. The modification will allow the warship to accommodate the Conventional Prompt Strike (CPS) weapon system, designed to conduct long-range precision strikes against heavily defended targets while expanding the Navy's conventional strike capabilities.


USS Michael Monsoor DDG-1001 Zumwalt-class destroyer underway in the Pacific Ocean ahead of planned hypersonic missile launcher modernization

USS Michael Monsoor (DDG-1001), the second Zumwalt-class destroyer, transits the Pacific Ocean during RIMPAC 2022. The U.S. Navy plans to equip the warship with a 600-ton launch module for Conventional Prompt Strike hypersonic missiles. (Picture source: U.S. Navy)


The project requires substantial changes to the destroyer's original configuration, which was developed around naval gunfire support and land-attack missions. The conversion involves replacing existing artillery installations with large-diameter vertical launch tubes, modifying internal compartments, and adapting the ship's combat systems. It forms part of a broader effort to transform the three Zumwalt-class destroyers into surface platforms capable of employing hypersonic weapons against targets beyond the reach of traditional naval artillery.

On November 17, 2026, Naval Sea Systems Command (NAVSEA) published two official notices, N00024-27-R-4444 and N00024-27-R-4443, outlining the industrial requirements for the modification. The first concerns the installation of the Large Missile Vertical Launch System (LMVLS), while the second announces an industry meeting scheduled for December 9, 2026, in Washington, D.C. The modernization period for Michael Monsoor is planned from May 2028 through August 2030. Both notices focus on industrial preparations and do not constitute an installation contract award or confirmation of an operational missile capability.

Related News: U.S. Navy advances hypersonic-armed Zumwalt destroyer toward 2027 operational Fielding

A 600-Ton Launch Module Requires Major Structural Modifications

The LMVLS is expected to arrive as a prefabricated, government-furnished assembly measuring approximately 13.6 meters long, 6.3 meters wide, and 12.5 meters high. Its estimated weight reaches 600 long tons, equivalent to approximately 610 metric tons. The assembly incorporates four large-diameter vertical launch tubes designed to accommodate Advanced Payload Modules (APMs), missile canisters, shock-isolation structures, and multiple internal structural levels.

The new launch installation will occupy the forward section of the destroyer, replacing space previously assigned to its 155 mm Advanced Gun System (AGS). The four launch tubes are designed to accommodate up to twelve CPS missiles, with three weapons carried in each tube under the Navy's planned configuration. This represents the intended maximum capacity rather than confirmation of the number of missiles that will be available for future deployments.

Installing the module presents challenges extending beyond its considerable weight. The 186-meter-long Michael Monsoor features a distinctive tumblehome hull, with inward-sloping sides intended to reduce its radar signature. Shipyards must account for the vessel's stability, structural loads, and restricted access when positioning an assembly of this size. NAVSEA is therefore examining industrial capabilities involving heavy-lift cranes, specialized handling equipment, precision measurements, and engineering procedures needed to integrate the module into the existing hull.

The work will require careful control of structural deformation during lifting and installation. Any misalignment could affect mechanical interfaces between the launch tubes and surrounding structures, potentially delaying subsequent integration activities. These requirements explain why the Navy is assessing industrial infrastructure and engineering expertise several years before the ship enters its scheduled modernization period.

Hypersonic Weapons Will Change the Destroyer's Strike Capabilities

The conversion extends beyond the installation of new launch equipment. The modernization effort also includes upgrades to the Total Ship Computing Environment Infrastructure (TSCEI), the integrated computing architecture supporting the destroyer's combat and shipboard systems. Associated changes concern weapon-control interfaces, electrical distribution, power conversion, and cooling systems required to support the new equipment.

The CPS missile differs considerably from conventional naval cruise missiles. Developed jointly with the U.S. Army's Long-Range Hypersonic Weapon (LRHW) program, it combines a two-stage solid-fuel rocket booster with a Common Hypersonic Glide Body (C-HGB). Following acceleration, the glide vehicle separates from its booster and maneuvers toward its target at speeds exceeding Mach 5. The Navy has not publicly established a definitive operational range for the complete maritime configuration, although the system is intended to engage targets at distances extending into the thousands of kilometers.

Unlike the Army's ground-based launcher, the naval configuration uses a cold-gas launch system that ejects the missile before its booster ignites. This arrangement limits the thermal and mechanical effects of launching such a large weapon from a warship. The common hypersonic missile completed a flight test in December 2024, followed by a cold-gas launch demonstration at Cape Canaveral in April 2025, supporting the development of the maritime launch architecture.

For USS Michael Monsoor, the planned capability would provide additional options for engaging high-value military targets, including command facilities, missile installations, and air-defense infrastructure inside contested areas. A maneuvering hypersonic glide vehicle could complicate interception and reduce the time available for an adversary to relocate mobile assets. Its effectiveness would nevertheless depend on accurate targeting intelligence, reliable command-and-control connectivity, and the availability of missiles in sufficient numbers.

Zumwalt Modernization Faces Delays and Hypersonic Missile Production Constraints

The conversion forms part of a class-wide modernization program involving USS Zumwalt (DDG-1000), USS Michael Monsoor (DDG-1001), and USS Lyndon B. Johnson (DDG-1002). The lead destroyer is already undergoing its hypersonic conversion, although the program has encountered problems affecting both installation schedules and missile development.

A Government Accountability Office (GAO) report published on July 17, 2026, found that modernization of the three destroyers was running approximately 24 months behind schedule. Work aboard USS Zumwalt was 94 percent complete as of January 2026, but unexpected modifications had required approximately 230,000 additional labor hours. The first CPS flight tests from a Zumwalt-class destroyer, originally planned for 2025, have consequently moved to 2027.

Missile production presents another obstacle. According to the same GAO report, the manufacturing facility responsible for CPS missile integration can currently produce a maximum of six to seven missiles annually, compared with the twelve required to stabilize production. The report identifies labor-intensive assembly procedures, quality-control difficulties, and production inefficiencies as contributing factors. Since the Navy and Army share the underlying missile architecture, these constraints affect both services' plans to expand their hypersonic inventories.

China's Naval Expansion Exposes Wider U.S. Shipbuilding and Missile Stockpile Challenges

The modernization comes as China's expanding navy places growing pressure on American naval capabilities in the Indo-Pacific. According to Pentagon projections cited by the Congressional Research Service, China's fleet could reach 435 ships by 2030. By comparison, the U.S. Navy operated 296 battle force ships in September 2024, while its fiscal year 2025 planning projected approximately 294 ships by 2030. These figures reflect earlier planning assumptions rather than a direct measurement of current fleet strength, but they illustrate the different trajectories identified in U.S. defense assessments.

Washington is simultaneously confronting persistent shipbuilding delays. An April 2026 GAO report found that Virginia-class nuclear-powered attack submarine production was progressing at approximately one submarine annually as of June 2025, compared with the Navy's objective of two. The first Columbia-class ballistic missile submarine was also projected to arrive at least eighteen months behind its contractual delivery date. Delays affecting Arleigh Burke Flight III destroyers further illustrate the pressure on American shipyards and their suppliers.

Missile inventories face similar industrial constraints. Following extensive U.S. missile expenditure during operations against Iran, a May 2026 analysis by the Center for Strategic and International Studies estimated that rebuilding stocks of Tomahawk cruise missiles, Patriot interceptors, and THAAD interceptors to prewar levels could take at least three years. These weapons also support American contingency planning in the Western Pacific, where a prolonged confrontation could require sustained expenditure of precision-guided munitions.

Against this background, equipping existing Zumwalt-class destroyers with hypersonic weapons offers the U.S. Navy a means of introducing new long-range strike capabilities without waiting for an entirely new surface combatant design. Yet the contrast remains between China's expanding naval fleet and the difficulties facing American shipbuilding and missile production. The challenge for Washington is not simply to deploy more advanced weapons, but to produce enough ships and missiles to sustain operations in a prolonged conflict, particularly as its submarine construction programs and existing munition inventories are already under considerable pressure.


Explore More Defense News

• Land Defense News
• Naval Defense News
• Defense Aerospace News

Written By Erwan Halna du Fretay - Defense Analyst Senior , Army Recognition Group

Erwan Halna du Fretay holds a Master’s degree in International Relations and has experience studying conflicts and global arms transfers. His research interests include security and strategic studies, particularly the dynamics of the defense industry, the evolution of military technologies, and the strategic transformation of armed forces.


Copyright © 2026 Army Recognition