Breaking News
Lockheed Martin to manufacture ExLS naval missile launchers in Canada with $2 million investment.
Lockheed Martin Canada announced a $2 million investment on November 17, 2026, to establish Extensible Launching System (ExLS) naval missile launcher component manufacturing at its Kanata facility in Ottawa. The expansion creates 10 skilled positions and establishes a second production hub alongside Moorestown, New Jersey, supplying launcher hardware to international customers including Poland. The funding satisfies economic offset obligations under Canada's Industrial and Technological Benefits policy tied to the Royal Canadian Navy's 15 planned River-class destroyers, even though ExLS is not scheduled for installation aboard those vessels.

The modular ExLS architecture includes a Host configuration, adapting existing Mk 41 and Mk 57 vertical launching cells to reduce integration costs by over 50%, and a Standalone configuration, a three-cell below-deck launcher developed with MBDA UK that houses 12 Sea Ceptor CAMM interceptors. (Picture source: MBDA)
On November 17, 2026, Lockheed Martin Canada announced a $2 million investment to manufacture Extensible Launching System (ExLS) components at its 40,000-square-foot facility in Kanata, Ottawa, under industrial commitments arising from the Royal Canadian Navy's 15 planned River-class destroyers. The investment covers production tooling, manufacturing equipment, workforce training, and facility modifications, with 10 skilled positions already created. Kanata will supply components to Lockheed Martin's existing production operation in Moorestown, New Jersey, supporting international customers including Poland. The ExLS comprises two configurations: the Host ExLS, which adapts existing Mk 41 and Mk 57 vertical launching cells to additional weapons, and the Standalone ExLS, which provides an independent below-deck missile launcher.
Developed with MBDA UK, the three-cell Standalone ExLS carries 12 Sea Ceptor CAMM interceptors, four per cell, and completed qualification in December 2017. Although the ExLS was removed from the River-class destroyers' planned armament, Canadian manufacturing expenditure contributes to Lockheed Martin's obligations under Canada's Industrial and Technological Benefits policy, allowing Canadian manufacturing expenditure to count toward contractual economic commitments even when the resulting equipment is intended for other customers. The $2 million investment represents $50 per square foot of Kanata's existing manufacturing area, with expenditure concentrated on equipment and production capabilities rather than new factory construction.
Related Topic: Canada reveals updated River-class destroyer design with major combat system changes
The facility already manufactures cabinets and consoles for the CMS 330 naval combat management system, including mechanical structures, electrical assemblies, military cable harnesses, and quality-control capabilities. The ExLS manufacturing will extend these activities to launcher components, including precision mechanical assemblies and electrical equipment, with the resulting output feeding Lockheed Martin's wider manufacturing process in Moorestown. Recruitment covers mechanical assemblers, cable fabricators, manufacturing engineers, production controllers, quality-control specialists, and procurement personnel, alongside student cooperative placements.
Canadian suppliers are expected to manufacture complex steel and alloy components, extending potential participation into Lockheed Martin Canada's network of more than 1,000 domestic suppliers. The company employs more than 1,300 people in Canada and has contributed $3.6 billion CAD to national GDP over five years, while supporting an annual average of 4,561 jobs. The Host ExLS operates as an internal adapter for Mk 41 and Mk 57 vertical launching systems, allowing smaller weapons to use existing cells without requiring completely redesigned missile canisters. Mk 41 launchers normally comprise eight-cell modules, with self-defense, tactical, and strike-length configurations measuring 5.31 m, 6.76 m, and 7.70 m in height, respectively, and a maximum canister width of approximately 638 mm.
Installed inside an existing VLS cell, the Host ExLS incorporates lightweight composite structures, weapon-specific adapters, cell-based electronics, and open-system software to connect qualified munitions to the ship's launcher. Its principal advantage is retaining the weapon's All Up Round (AUR) configuration, including its existing canister, reducing additional engineering and qualification requirements. Lockheed Martin estimates that this approach reduces weapon integration costs by more than 50% compared with conventional weapon-specific VLS integration, principally by limiting additional canister engineering, qualification, and testing. The associated weapons include CAMM, RAM Block 2, Nulka active decoys, Longbow Hellfire, and AGM-179 Joint Air-to-Ground Missile (JAGM), although each requires compatible launch electronics, combat system interfaces, and qualification before operational employment.
The Standalone ExLS, for its part, addresses the requirements of ships without an existing Mk 41 or Mk 57 battery by providing an independent vertical launching installation built around smaller missile canisters, using a three-cell below-deck arrangement developed with MBDA UK. Each cell accommodates four individually canistered CAMM missiles, giving one module a total of 12 ready-to-launch interceptors, two modules 24, three modules 36, and four modules 48. Two successful CAMM ejection tests, conducted in December 2017, validated the qualification of the three-cell configuration. The launcher also incorporates Mk 41-derived hatches with equivalent ballistic protection, anti-icing equipment, optional cell deluge system, and integrated safety monitoring. Electrical supply requirements are 440 V AC, 60 Hz, three-phase, with transformers and dedicated launch-control electronics.
Unlike a strike-length Mk 41 battery, which can accommodate larger weapons such as SM-2 and Tomahawk, the Standalone ExLS allows smaller warships to concentrate short-range air-defense missiles in dedicated cells, although each additional module logically requires deck penetration, below-deck volume, structural reinforcement, maintenance access, and electrical integration. The three-cell ExLS also separates the mechanical operation of the launcher from the missile-specific functions through Lockheed Martin's Launch Control Module (LCM) and MBDA UK's Sea Ceptor Launch Management System (LMS). The latter maintains interfaces with all 12 CAMM missiles and can prepare three simultaneously for launch, although this does not establish a sustained firing rate.
On the other hand, Lockheed Martin's ExLS Launch Control Module manages launcher operation, hazard monitoring, and built-in testing, while the Hatch Control Panel provides remote launch operation, local maintenance control, and hatch anti-icing activation. Munition adapters also support missile alignment, shock mitigation, loading, storage, launch, and unloading. The CAMM uses a soft-launch mechanism in which a gas generator ejects the missile from its canister before its rocket motor ignites, avoiding main-motor exhaust inside the launcher during ejection. After ejection, the missile's active radar seeker, inertial navigation, and mid-course guidance updates permit engagements without continuous target illumination, reducing dependence on dedicated fire-control illuminators during simultaneous air defense engagements. ExLS accommodates different weapon categories, but their operational applications and integration requirements differ considerably.
The original CAMM weighs 99 kg, measures 3.2 m in length and 166 mm in diameter, and has an engagement range exceeding 25 km, providing local air defense against aircraft, helicopters, and cruise missiles. The RAM Block 2 is a 127 mm-diameter interceptor weighing approximately 88 kg, intended primarily for close-in defense against anti-ship missiles and aircraft. The Nulka instead deploys an active electronic decoy to divert radar-guided anti-ship missiles from the defended vessel, while the AGM-114 Longbow Hellfire and AGM-179 JAGM missiles provide precision engagement options against smaller surface targets, with the JAGM combining millimeter-wave radar and semi-active laser guidance. These weapons require separate firing interfaces and qualification, even when they share a launcher-adapter concept.
The ammunition-density advantage also depends on how a navy allocates its existing VLS capacity: a 24-cell Mk 41 installation could theoretically accommodate 96 quad-packed ESSM interceptors, but doing so would leave no cells for larger SM-2, Tomahawk, or anti-submarine missiles. The ExLS, in both variants, can therefore preserve main battery cells by accommodating smaller or additional defensive weapons separately. Canada's River-class program provides a direct example of the trade-offs involved in configuring a modern warship's missile inventory, even though the ExLS is no longer included in the ships' planned armament. Canada intends to acquire 15 destroyers with an estimated acquisition cost of $77.3 billion, including construction, weapons, ammunition, and spares, with initial service expected in the early 2030s.
Each ship, planned to replace the Halifax-class frigates and restore the area air-defense capability previously provided by the retired Iroquois-class destroyers, will measure 151.4 m in length and 20.75 m in beam, displace approximately 8,080 tonnes at standard load, reach 27 knots, and travel 7,000 nautical miles, with a complement of 210 personnel. Moreover, the combat system will combine the Aegis, the AN/SPY-7(V)3 AESA radar, Cooperative Engagement Capability, and a Canadian Tactical Interface. Planned missile armament includes 24 Mk 41 cells for SM-2 Block IIIC, quad-packed ESSM Block II, and Tomahawk Block V missiles, alongside eight Naval Strike Missiles in two quadruple launchers and a 21-round Mk 144 RAM Block II launcher. An illustrative load of eight SM-2, eight Tomahawks, and 32 ESSM would therefore provide 48 missiles across the 24 Mk 41 cells, supplemented by the separate anti-ship and close-in defense launchers.
Explore More Defense News
• Land Defense News
• Naval Defense News
• Defense Aerospace News
Written by Jérôme Brahy - Defense Analyst
Jérôme Brahy is a defense analyst and documentalist at Army Recognition. He specializes in naval modernization, aviation, drones, armored vehicles, and artillery, focusing on strategic developments in the United States, China, Ukraine, Russia, South Korea, Türkiye, and Belgium. His analyses go beyond the facts, providing context, identifying key actors, and explaining why defense news matters globally.















