Breaking News
Saronic to build ALPV autonomous supply vessel prototype for US Marine Corps Pacific operations.
Saronic Technologies announced it received a Defense Innovation Unit (DIU) prototype Other Transaction agreement to develop an Autonomous Low Profile Vessel (ALPV) for U.S. Marine Corps resupply missions in contested coastal waters. The uncrewed surface craft will transport ammunition, fuel, rations, and equipment from offshore ships directly onto unimproved beaches without port infrastructure. Following November 9 awards to three contractors, the program requires an 18,000 lb (8,165 kg) minimum payload, a 1,000 to 2,000 nautical mile loaded range objective, and a 12-knot minimum speed in sea state 4 to support dispersed Pacific logistics.

Saronic Technologies now joins Rudder Industries and Sea Machines Robotics in the DIU ALPV competition, with the goal of delivering scalable, low-signature uncrewed resupply vessels to the U.S. Marine Corps. (Picture source: Saronic Technologies)
On November 16, 2026, Saronic Technologies announced that it had received a prototype Other Transaction (OT) agreement from the Defense Innovation Unit (DIU) to develop an Autonomous Low Profile Vessel (ALPV) for the U.S. Marine Corps' resupply missions in contested coastal waters. The autonomous vessel will transport ammunition, fuel, food, and maintenance equipment between ships and directly onto unimproved beaches, combining passive sensors, autonomous navigation, a low-profile hull, and the ability to operate without an embarked crew. The announcement follows DIU's November 9 selection of three contractors for the ALPV program (Saronic Technologies, Rudder Industries, and Sea Machines Robotics), under a competition requiring a cargo capacity of at least 18,000 lb (8,165 kg), a fully loaded range objective of 1,000 to 2,000 nautical miles, and a minimum speed of 12 knots in sea state 4.
The program builds on Marine Corps experiments in Okinawa and California, while involving the Marine Corps Warfighting Laboratory, Capabilities Development and Force Integration Directorate, and Naval Sea Systems Command's Combatant Craft Division. The prototype agreement establishes a development and evaluation phase rather than an immediate production purchase, as the DIU seeks vessels that can be manufactured in sufficient quantities to support repeated coastal resupply missions. The Autonomous Low Profile Vessel (ALPV) is intended to focus on the final maritime segment of a supply chain, by connecting offshore supply ships with dispersed Marine positions lacking ports, piers, or permanent unloading facilities, particularly across Pacific islands and coastlines.
Related Topic: US tests new Bulwark Caravel autonomous vessel to transform how troops get supplies in future wars
Its minimum payload capacity would allow the transport of ammunition containers, packaged fuel, rations, batteries, and replacement components, while the low-profile hull and passive sensors are intended to reduce exposure to visual and radar detection. Unlike conventional landing craft operations, the ALPV must navigate autonomously, approach shallow water, ground on an unimproved beach, let Marines unload supplies, and withdraw without an embarked crew. Its operational value consequently depends on completing repeated ship-to-ship, shore-to-shore, and ship-to-shore deliveries, allowing the U.S. Marine Corps to free helicopters or crewed landing craft from every small cargo movement.
Beaching also makes cargo access, propulsion protection, shallow draft, and unloading equipment decisive design considerations, since a vessel carrying eight tonnes of supplies is useful only if Marines can unload that cargo without requiring cranes or handling equipment at each destination. The Marine Corps began pursuing low-profile autonomous logistics vessels several years before the DIU's November 2026 awards, with the 2025 Force Design Update already placing autonomous long-range logistics distribution on a path toward a formal acquisition program. During 2025, Marine personnel rehearsed ALPV-related operations at Naha Military Port in Okinawa, while the 12th Littoral Logistics Battalion participated in evaluations involving the Leidos Sea Specter.
On January 22, 2026, personnel from the 1st Marine Logistics Group also tested autonomous maritime cargo transportation at Camp Pendleton, California, examining its integration into coastal supply operations. DIU's subsequent competition was opened to commercial manufacturers, with Saronic, Sea Machines Robotics, and Rudder Industries selected after the solicitation period ended on March 16, 2026. Rudder Industries entered the effort as a first-time Department of War contractor, while Sea Machines already supplied autonomous control equipment for earlier Marine Corps experimentation. These prototype agreements are primarily intended to help the Marine Corps determine which designs can satisfy its operational requirements and support subsequent production.
What the Marine Corps requires from its new autonomous logistics vessels
DIU's March 2026 requirements for the ALPV specified a minimum payload capacity of 18,000 lb (8,165 kg), sufficient for six Joint Modular Intermodal Containers (JMICs) carrying 3,000 lb (1,361 kg) each, or an alternative configuration using two 5,100 lb (2,313 kg) containers. The vessel must also accommodate pallets and bulk liquids, maintain at least 12 knots fully loaded in sea state 4, operate in sea state 5 with 2.5 to 4 m waves, and survive sea state 6 with 4 to 6 m waves. Its loaded range objective extends from 1,000 to 2,000 nautical miles (1,852 to 3,704 km), equivalent to 83.3 and 166.7 hours of continuous travel at 12 knots. Additional requirements include 96 hours of low-speed loitering, navigation under degraded GPS and communications, the supervision of multiple vessels by one operator, commercial or military trailer transportation, and demonstration of beach landing and withdrawal.
Prototype demonstration readiness is targeted within 180 days of award, leaving manufacturers to reconcile long-range fuel capacity, shallow draft, low freeboard, and an 8.2-tonne cargo load within road-transportable dimensions. The Leidos Sea Specter provides a comparison with the new ALPV requirements because it has already been operated during Marine Corps autonomous logistics experiments. The vessel measures 19.75 m long and carries 4,627 kg of cargo inside an 8.84 m compartment. Its 230 hp diesel propulsion supports an 8-knot cruising speed and a reported range of 2,000 to 2,300 nautical miles, while its Sea Machines SM300 system provides autonomous navigation and remote vessel control. The initial hull used fiberglass-protected wood, and composite construction was later investigated for greater durability.
How the new ALPV compares with the Marine Corps' existing Sea Specter
DIU's new payload minimum exceeds the Sea Specter's capacity by 3,538 kg, or 76.5%, while the 12-knot minimum speed is 50% higher than the Sea Specter's reported cruise. Over 240 nautical miles, this reduces one-way sailing time from 30 to 20 hours, while 10 fully loaded ALPVs could transport 81.65 tonnes per cycle compared with 46.27 tonnes for 10 Sea Specters, increasing cargo throughput without proportionally increasing vessel numbers. The operational demand comes principally from Marine Littoral Regiments, including the 3rd Marine Littoral Regiment in Hawaii and the 12th Marine Littoral Regiment in Okinawa, each organized around a Littoral Combat Team, a Littoral Anti-Air Battalion, and a Littoral Logistics Battalion. Their dispersed coastal positions support reconnaissance, air defense, and anti-ship operations, including the Navy-Marine Expeditionary Ship Interdiction System (NMESIS), armed with Naval Strike Missiles exceeding 185 km in range.
At the ALPV's minimum payload, 20 vessels could dispatch 163.3 tonnes per fully loaded cycle, while 50 could dispatch 408.25 tonnes. For a 240-nautical-mile route at 12 knots, each round trip requires at least 40 sailing hours, increasing to an illustrative 48-hour cycle after cargo handling and servicing. Under those assumptions, 20 vessels could theoretically transport 81.65 tonnes daily, or 571.55 tonnes weekly; applying an illustrative 80% successful-delivery factor reduces weekly throughput to 457.24 tonnes. Consequently, the actual amount of ammunition, fuel, and other usable supplies reaching Marine detachments would depend on cargo configuration, unloading arrangements, distance, vessel availability, and the frequency of completed delivery cycles.
How Saronic plans to expand autonomous vessel production for the U.S. Navy and Marine Corps
Saronic's existing autonomous vessel family provides several reference points for the ALPV's proposed autonomy and manufacturing approach, although the new logistics vessel occupies a different payload category. The company's existing autonomous fleet ranges from the 7.32 m Corsair, carrying 454 kg over more than 1,000 nautical miles at speeds exceeding 35 knots, to the 15.85 m Mirage, carrying 1,588 kg over more than 2,500 nautical miles. More than 400 Corsairs had been built by September 2026 under a U.S. Navy production arrangement exceeding $400 million. Its larger 54.86 m Marauder carries up to 150 tonnes in four 40-foot or eight 20-foot containers, with ranges of 5,400 nautical miles at a 25-tonne load and 4,100 nautical miles fully loaded, a 12-knot cruise, and a sprint speed exceeding 25 knots.
During the Navy's 2026 Medium Unmanned Surface Vessel Marketplace, the Marauder completed more than 140 scenarios over eight continuous days, including passive vessel tracking without active radar, before Saronic received a September 29 production award. The company's Echelon software also integrates mission planning, simulation, telemetry, and multi-vessel supervision, drawing on autonomy technology accumulated across more than 350,000 nautical miles and 55,000 operating hours. The ALPV could also be part of Saronic's wider industrial expansion, which includes its April 16, 2025 acquisition of Gulf Craft's Louisiana shipyard.
This will add nearly 100 acres and a planned investment exceeding $250 million, with an objective of producing 50 unmanned ships annually and creating more than 500 jobs. Its Port Alpha project in Brownsville, Texas, carries a reported $3.2 billion investment figure and employment ambitions reaching 10,000 positions. On September 16, 2026, the company also secured a U.S. Navy contract for Landing Craft Utility construction, with production planned for 2028 and deliveries beginning in 2029.
These 170-tonne-capacity vessels, with a range of 1,200 nautical miles, can carry 20.8 times the ALPV's minimum payload, making them suitable for heavy equipment rather than frequent small deliveries. These investments also accompany a U.S. Navy shipbuilding plan identifying 291 battle force ships against the statutory 355-ship requirement, a shortfall of 64 vessels. Although autonomous logistics craft do not directly increase the number of battle force ships, they could expand maritime distribution capacity without requiring an equivalent increase in embarked crews across both the U.S. Navy and the U.S. Marine Corps.
Explore More Defense News
• Land Defense News
• Naval Defense News
• Defense Aerospace News
Written by Jérôme Brahy - Defense Analyst
Jérôme Brahy is a defense analyst and documentalist at Army Recognition. He specializes in naval modernization, aviation, drones, armored vehicles, and artillery, focusing on strategic developments in the United States, China, Ukraine, Russia, South Korea, Türkiye, and Belgium. His analyses go beyond the facts, providing context, identifying key actors, and explaining why defense news matters globally.















