Skip to main content

Japan to build new factory in Kobe to continue production of US-2 amphibious aircraft by 2029.


Japan's ShinMaywa Industries confirmed plans to invest several billion yen in a new 17,500 m² factory on Kobe Airport Island to assemble US-2 amphibious aircraft for the Japan Maritime Self-Defense Force (JMSDF) starting in 2029. Selected by Kobe City for a proposed 50-year lease, the plant will integrate US-2 assembly with carbon fiber reinforced plastic (CFRP) component manufacturing for commercial and military aviation following the February 2026 delivery of Japan's ninth aircraft and FY2025 authorization of a tenth. Co-locating commercial aerostructure fabrication with defense production stabilizes factory utilization between intermittent flying-boat orders.


Powered by four turboprop engines and a boundary-layer-control (BLC) system, the US-2 amphibious aircraft has a range exceeding 4,700 km, water takeoff and landing distances of 280 m and 330 m, and open-ocean operability in waves up to 3 m. (Picture source: Japanese MoD)


On October 30, 2026, Japan's ShinMaywa Industries confirmed plans to invest several billion yen in a new factory on Kobe Airport Island to assemble US-2 amphibious search-and-rescue aircraft for the Japan Maritime Self-Defense Force (JMSDF), with operations scheduled to begin in 2029. Kobe City selected ShinMaywa on October 15 for a 17,500 m² industrial site under a proposed 50-year lease, marking the company's first new flying boat manufacturing facility in 87 years. The new facility will combine the assembly of the US-2 with the manufacturing of carbon fiber reinforced plastic (CFRP) components for military and commercial aircraft, reducing the dependence on individual defense orders.

The investment also follows the delivery of Japan's ninth US-2 in February 2026 and the authorization of a tenth aircraft under the FY2025 defense budget, after rising procurement costs had threatened further purchases. With a range exceeding 4,700 km, water takeoff and landing distances of 280 m and 330 m, as well as the ability to operate in 3 m waves, the US-2 allows Japan to conduct long-distance maritime rescue missions beyond the practical endurance of many helicopters, with a capability that many conventional fixed-wing aircraft cannot fully replicate. The US-2 was developed by ShinMaywa to replace the US-1A, retaining the ability to operate from both runways and open water while addressing the earlier aircraft's limitations in cruising speed, cabin pressurization, and high-altitude flight. 

Related Topic: Japan deploys Type 25 Anti-Ship Missile in first field exercise with US targeting support

The development program lasted eight years, with flight testing beginning in December 2003, production commencing in 2007, and first delivery in 2009. Measuring 33.3 m long, 33.2 m wide, and 9.8 m high, the Japanese amphibious aircraft combines a boat-shaped fuselage, a high-mounted wing, a retractable landing gear, and a pressurized cabin. Four Rolls-Royce AE2100J turboprop engines, each producing 4,592 shp, deliver a combined 18,368 shp (13.7 MW) through six-bladed Dowty R414 propellers, while a separate LHTEC T800 turboshaft powers its boundary-layer-control (BLC) system. Maximum speed exceeds 580 km/h, cruising speed exceeds 480 km/h, cruising altitude reaches at least 6,100 m, and published range exceeds 4,700 km.

How the ShinMaywa US-2 can take off from water in just 280 meters

The maximum takeoff weight reaches 47.7 tonnes from a runway, compared with 43 tonnes for water operations, a 4.7-tonne or 9.9% difference affecting available fuel and payload for missions involving sea landings. The cabin accommodates an 11-person rescue crew, 20 seated passengers, or 12 stretcher patients, depending on configuration. The US-2's ability to operate from open water depends primarily on its boundary-layer-control (BLC) system, which maintains lift and control effectiveness at speeds as low as 90 km/h (49 knots); the BLC includes a separate turbine-powered compressor that supplies pressurized air over selected wing and control surfaces, delaying airflow separation and allowing controlled flight at unusually low airspeeds.

This is particularly important during water landings because impact energy increases with the square of touchdown speed; compared with a 150 km/h touchdown, contact with water at 90 km/h reduces kinetic energy per unit mass by 64%, lowering the energy that the hull must absorb. At 43 tonnes, water takeoff requires 280 m and landing 330 m, compared with runway distances of 490 m and 1,500 m at 47.7 tonnes, although different operating weights and surfaces prevent direct braking comparisons. A combination of a groove-type wave-canceling device, spray strips, and spray suppressors redirects water away from the fuselage, propellers, and engines, thus improving operations in waves reaching 3 m. The US-2's boundary-layer-control system and hull protection therefore address two separate requirements: reducing the speed needed to generate sufficient lift and controlling the hydrodynamic forces and spray encountered during repeated offshore operations. 

How Japan uses the US-2 for long-range maritime rescue missions

The Japan Maritime Self-Defense Force (JMSDF) operates the US-2 through its 71st Flight Squadron, headquartered at Marine Corps Air Station Iwakuni, with additional operations from Naval Air Facility Atsugi. Its standard 11-person crew includes two pilots, one rescue coordinator, two maintenance specialists, three rescue divers, two paramedics, and one sensor operator, with five personnel assigned specifically to diving and medical tasks. Consequently, the pressurized cabin carries medical equipment, inflatable boats, diving equipment, and up to 12 stretcher patients or 20 passengers, supported by LCD-based cockpit instrumentation and fly-by-wire controls. At 480 km/h, a rescue location 1,000 km from Iwakuni requires 2 hours and 5 minutes of outbound transit, excluding climb, descent, winds, and search activity.

Potential coverage extends toward remote areas including the southern Kamchatka Peninsula, Mindanao in the Philippines, and Minamitorishima, subject to fuel reserves and mission conditions. In 2013, Japan operated five US-2s and two US-1As, including two aircraft normally positioned at Atsugi. Across both aircraft families, Japanese flying boats have conducted more than 1,000 rescue-related deployments, including maritime emergencies and medical evacuations from remote islands. The US-2's current manufacturing difficulties stem from its limited procurement volume, with nine aircraft delivered between 2009 and February 2026, equivalent to 0.53 deliveries annually or one every 22.7 months on average. The FY2025 authorization of aircraft No. 10 preserved its production after rising acquisition costs raised the possibility of termination, but it did not establish a sustained annual order rate.

Why ShinMaywa is expanding US-2 production despite limited Japanese orders

ShinMaywa manufactures the aircraft at its Konan Plant in Kobe, while Mitsubishi manufactures outer wing sections and rear engine-nacelle structures, Kawasaki Heavy Industries supplies cockpit structures, and NIPPI Corporation produces watertight landing-gear housings. The US-2's manufacturing requirements differ from those of conventional land-based aircraft because its hull, landing-gear compartments, corrosion protection, and water-contact structures must withstand aerodynamic loads, repeated water impacts, and seawater exposure. Intermittent orders also complicate retention of qualified workers, dedicated tooling, and suppliers between assembly cycles, particularly when manufacturers cannot spread fixed expenses across large production batches. 

The new Kobe factory will occupy 17,500 m² of a 24,000 m² industrial property, with a proposed 50-year lease and a published rental benchmark of ¥550 per m² monthly, equivalent to ¥115.5 million annually for the proposed area. It will work alongside the Konan Plant, combining US-2 assembly with CFRP manufacturing for programs including Boeing 787 wing spars, Boeing 777/777X wing-body fairings, and Bombardier Global 7500 control surfaces. ShinMaywa's aircraft business generated ¥41.5 billion in FY2025 revenue and ¥2.5 billion in operating profit, a 6.0% margin, with FY2026 forecasts of ¥48.1 billion and ¥3.8 billion, respectively, raising the projected margin to 7.9%.

Could U.S. military interest and Indian orders expand the ShinMaywa US-2 fleet?

Defense-related sales increased from ¥21.3 billion to ¥30 billion, with a ¥50 billion target by FY2030 and anticipated annual US-2 revenue of ¥8 billion to ¥10 billion. That would represent 16% to 20% of the defense-sales target, while commercial aerospace contracts could maintain factory utilization between individual flying-boat orders. ShinMaywa has also examined overseas military and civilian applications in the past to increase US-2 production beyond Japan's limited domestic requirements. U.S. military personnel examined the aircraft in Guam in February 2022, followed by an April visit to Iwakuni by Major General Eric Hill, then deputy commander of U.S. Air Force Special Operations Command.

Potential missions included maritime personnel recovery, casualty evacuation, and transport to Indo-Pacific islands lacking suitable runways, although U.S. adoption would require compatible communications, mission equipment, maintenance arrangements, and cabin modifications. India previously considered purchasing 12 to 18 US-2s for naval and coast guard operations, including negotiations during 2016, but acquisition costs and disagreements over local production under Make in India prevented an agreement. ShinMaywa has also examined a firefighting variant carrying 15 tonnes of water, with a proposed range of 1,245 nautical miles (2,306 km), alongside sensor-assisted night water-landing controls, reinforced cargo floors, and enlarged cargo doors. None of these initiatives has yet established an additional contracted production series, meaning that, to date, Japanese defense orders remain the principal support for the US-2 manufacturing.


Explore More Defense News

• Land Defense News
• Naval Defense News
• Defense Aerospace News

Written by Jérôme Brahy - Defense Analyst

Jérôme Brahy is a defense analyst and documentalist at Army Recognition. He specializes in naval modernization, aviation, drones, armored vehicles, and artillery, focusing on strategic developments in the United States, China, Ukraine, Russia, South Korea, Türkiye, and Belgium. His analyses go beyond the facts, providing context, identifying key actors, and explaining why defense news matters globally.


Copyright © 2026 Army Recognition