AP4C Range

The AP4C is a portable chemical contamination control device used to detect directly chemical agents in the form of vapor, aerosols, dust and with the S4PE in the form of liquid.

AP4C is the hand held detector with the largest range of detectable products.

AP4C detects compounds of phosphorus (such as all G, V agents: GA, GB, GD, GE, GF, VE, VX), compounds of sulfur (such as H, HD, HL agents, Arsenic compounds (contained in L, SA, DM) and other gases such as Ammonia, Cyanogen chloride, Cyahydric Acid, etc.
AP4C detects also all the precursors of the above chemicals.

The high sensitivity and fast response time make the AP4C especially suitable to check up contamination.
It also fits check up after decontamination.

- Detects simultaneously agents on the 4 channels.
- Very sensitive to detect all G agents (GA, GB, GD, GE, GF, VE, VX, etc…) even if the agent is not pure or manufactured in poor conditions.
- Detects agents in all forms: vapor – aerosols – droplets – dust agents and frozen agents.
- Detects liquid agents spread on most surfaces (VX, thicked SOMAN, HD at low temperatures.
- Detects agents in water, on the skin (medical use).
- Capability to detect TIC’s: PH3, PARATHION on P channel – PCl3, NH3, NOx on HNO channel – SO2, SF6, CS2, H2S, H2SO4 on S channel – AsH3 on As channel. And hundred of others gases.

AP4C-F has been designed for an easy installation on the main deck or the bridge deck (contamination and detection remaining outside of the citadel), for a real time monitoring of external toxic gas concentration and alarm to the user.

Alarm and measurements are fully automatic and require no action from crew at any moment. AP4C-F can easily be installed and connected to the central control system and be adapted to any customer software.

Designed to withstand the sea harsh operating environment, AP4C-F runs continuously and does not require any protection to fulfil its mission.

Extremely reliable, AP4C-F has the largest user availability of the market. An annual check is the only required maintenance operation.

AP4C-V has been designed for an easy installation outside a vehicle (contamination and detection remaining outside the vehicle), for a real time monitoring of toxic gas concentration and alarm to the user.

Alarms and measurement are fully automatic and require no action from the vehicle crew at any moment. AP4C-V can easily be connected to the central control system of a vehicle and be adapted to anu customer software.

Designed to withstand the harsh environments of military vehicles, AP4C-V runs continuously and does not require any protection to fulfil its missions.

Extremely reliable, AP4C-V has the highest user availability rate on the market. An annual check is the only required maintenance operation.

Thanks to its unique technology, AP4C-V has the shortest recovery time. Even after exposure to high concentration, AP4C-V is ready for another detection after some seconds.