MBDA Aster 30 air defense missile system  MSPO 2014
General Dynamics European Land Systems
a
 

Defense Industry News - Otokar

 
 
Thursday, November 22, 2012, 11:17 AM
 
Turkey Defence Company OTOKAR presents the first prototype of national main battle tank ALTAY.
The first prototypes of Turkey’s first national main battle tank ALTAY which is designed and developed by OTOKAR has been introduced. Realized with an investment of about 500 million USD, the ALTAY Project is planned for mass production in 2015.
     
The first prototypes of Turkey’s first national main battle tank ALTAY which is designed and developed by OTOKAR has been introduced. Realized with an investment of about 500 million USD, the ALTAY Project is planned for mass production in 2015.
Otokar ALTAY ceremony (from left to right): Mr. Recep Tayyip ERDOGAN - Prime Minister; Mr. Mustafa V. KOC - Koc Holding Chairman
     

The first prototypes of Turkey’s first main battle tank ALTAY which is designed and developed by OTOKAR, the biggest privately owned company of the Turkish Defence Industry, has been presented at OTOKAR facilities in Sakarya on November 15th. Held with the participation of Prime Minister Recep Tayyip ERDOGAN, the “ALTAY FIRST PROTOTYPE” ceremony was hosted by Mustafa V. Koc, Chairman of Koc Holding. General Necdet OZEL, Chief of General Staff; Ismet YILMAZ, Minister of Defence; General Hayri KIVRIKOGLU, Commander of the Turkish Land Forces; Murad BAYAR, Defence Industry Undersecretary; Kudret ONEN, Head of Koc Holding Defence Industry Group and Chairman of the Board of OTOKAR; Halil UNVER, Vice Chairman of OTOKAR and Serdar GORGUC, OTOKAR General Manager attended the ceremony.

The first prototypes of ALTAY reflect the results of the concept development and critical design process of the Project which started in 2009. The first prototype is planned to be used for the testing and optimization of ALTAY’s mobility. The second prototype will be used in order to test the firing performance of ALTAY. Two more prototypes are planned to be manufactured following the evaluation of the data gathered from first two prototypes. The ALTAY tank will be ready for mass production by 2015.

     
The first prototypes of Turkey’s first main battle tank ALTAY which is designed and developed by OTOKAR, the biggest privately owned company of the Turkish Defence Industry, has been presented at OTOKAR facilities in Sakarya on November 15th. Held with the participation of Prime Minister Recep Tayyip ERDOGAN, the “ALTAY FIRST PROTOTYPE” ceremony was hosted by Mustafa V. Koc, Chairman of Koc Holding. General Necdet OZEL, Chief of General Staff; Ismet YILMAZ, Minister of Defence; General Hayri KIVRIKOGLU, Commander of the Turkish Land Forces; Murad BAYAR, Defence Industry Undersecretary; Kudret ONEN, Head of Koc Holding Defence Industry Group and Chairman of the Board of OTOKAR; Halil UNVER, Vice Chairman of OTOKAR and Serdar GORGUC, OTOKAR General Manager attended the ceremony.
A memorial photo in front of ALTAY, including Recep Tayyip ERDOGAN, Prime Minister; Mustafa V. Koc, Chairman of Koc Holding; General Necdet OZEL, Chief of General Staff; Ismet YILMAZ, Minister of Defence and othe authorities.
     
The first ALTAY prototype had already covered more than 2.000 kilometers during tests up to now. Two prototypes exhibited a special show to the guests of the ceremony at the tank test track of OTOKAR. Including mobility performance like acceleration, maximum speed, side slope, suspension, stabilization track and off-road drive, this show made the impression that, when finished, ALTAY would be the most modern tank in the world.

Kudret ONEN, Head of Koc Holding Defence Industry Group and Chairman of the Board of OTOKAR shared the pleasure of introducing the first prototype of ALTAY to public. After reminding about the initial stages of the Project, ONEN also informed about the future activities of ALTAY. “550 engineers are working in order to complete the Project, 260 of which are OTOKAR employees. Together with the ALTAY team, and nearly 100 subcontractors, we aim to make the best of our time and prepare ALTAY for mass production by 2015.” Announcing that the mobility performance of OTOKAR’s first two prototypes would be demonstrated during the ceremony, ONEN continued as follows: “Today armoured tactical vehicles of OTOKAR are exported to almost 20 countries. With more than 25.000 vehicles used by the armies in the world, we represent our engineering and production capability. Up to now, we accomplished all our projects in time and perfectly, and we tried to fulfil all our commitments successfully.

As an example of this, I’d like to announce you that today we’ll show you the two prototypes of ALTAY. With the first prototype that you’ll see today, we’ll test the mobility of ALTAY. This first prototype already covered more than 2.000 kilometers, and first results prove that we’re doing right. And with the second prototype we will perform firing tests of ALTAY. We also aim to make this prototype ready for the firing tests during the following months. By using the results that we gather from these two prototypes, we’ll manufacture the ultimate prototypes, test them, and bring ALTAY to perfection as the most modern and capable tank in the world.”
     
The first ALTAY prototype had already covered more than 2.000 kilometers during tests up to now. Two prototypes exhibited a special show to the guests of the ceremony at the tank test track of OTOKAR. Including mobility performance like acceleration, maximum speed, side slope, suspension, stabilization track and off-road drive, this show made the impression that, when finished, ALTAY would be the most modern tank in the world.
Turkish OTOKAR Altay main battle tank during trial tests.
     
Speaking at the ceremony, Mustafa V. KOC, Chairman of the Board of Koc Holding, expressed his gladness about the current situation of the National Tank Project which has a significant importance for the national defence industry strategy of Turkey. KOC stated the fact that ALTAY had been a prestige Project not only for our country but also for Koc Group, and continued as follows: “ALTAY will provide great acceleration to land platform area of our country’s defence industry in terms of design, development and manufacturing not only with its existing power but also with its investments, developing labour force and technical know-how. With its power to withstand possible threats of today and the future, ALTAY will further enhance the strength of our armed forces as the most modern battle tank in the world. With stable management, growing economy and strong army, our country will reinforce its power and leadership within the region, and Turkey will take its place among the special main battle tank manufacturers of the world.

Moreover, our country will continuously progress with products developed by its own resources and capabilities, and created with its own technology. Until today we realized many achievements in the defence industry area by means of long term approaches, a properly defined vision and leadership. As Koc Group, we have been endeavouring, investing and realizing achievements in the defence industry in order to serve these goals and strategies. We believe that our defence industry will further develop in the future through encouraging specialization, and by having and controlling technology.”

At the end of the ceremony, Mustafa V. KOC, Chairman of the Board of Koc Holding presented an ALTAY tank model to Prime Minister Recep Tayyip ERDOGAN as a memory of the day.
     
The first ALTAY prototype had already covered more than 2.000 kilometers during tests up to now. Two prototypes exhibited a special show to the guests of the ceremony at the tank test track of OTOKAR. Including mobility performance like acceleration, maximum speed, side slope, suspension, stabilization track and off-road drive, this show made the impression that, when finished, ALTAY would be the most modern tank in the world.
 
 
< Prev   Next >
SEO by Artio
 
--------------------------- FLASH NEWS ---------------------------
AAD 2014 news show daily coverage report Africa Aerospace Defence Exhibition Pretoria South Africa African defense industry army military technology equipment AAD 2014, Africa Aerospace and Defence Exhibition which takes places from the 17 to 21 September at air force base waterkloof near Pretoria, in South Africa. Follow all activities of AAD 2014 with news, pictures and video reports.
 
IDEX 2015 Official Online Show daily news Army Recognition coverage report International Defence Exhibition Abu Dhabi United Arab Emirates army military defense industry technology
Army Recognition is proud to announce the launch of its new Website http://www.DefenseWebTV.com. For the first time on the Internet, Army Recognition will provide a Defense & Security channel with video dedicated for the Defense and Security Industry.
AUSA 2014 Rafael Israeli Israel defense indusry AUSA 2014
CMI Defence Weapons System Turret Company Belgium
Tenders Defence Security  global International world worldwide tender public government ministry official agency bids news RFPs RFQs RFP RFQ procurement notices information request bids business opportunities online

FNSS defense company industry armoured amphibious vehicle turret manufacturer supplier Turkey Turkish military combat army military technology


Streit Group armoured cars vehicles manufacturer
Shaanxi Baoji Special Vehicles Manufacturing is one of Chinese leading design and production centres for wheeled armoured 4x4 and 6x6 tactical vehicles
MBDA missile systems France French defense industry

Rafael Israel Israeli defence industry military technology equipment
Lockheed Martin
Musthane
CMI Defence weapon  systems for armoured vehicle


P&C International consulting and services provider for trade shows
SSangyong belgiumadvertising

Subscribe NewsLetter