Skip to main content

KONGSBERG is showcasing REMUS AUVs family during UDT 2015.

| 2015
KONGSBERG is showcasing REMUS AUVs family during UDT 2015
KONGSBERG is an international knowledge-based group that supplies high-technology systems and solutions to customers in the defence and aerospace domain and to civilian markets. During UDT 2015 Undersea Defence Technology exhibition and conference, KONGSBERG presents its REMUS family of AUVs with REMUS 100, REMUS 600-S and REMUS 6000 AUVs.
KONGSBERG is showcasing REMUS AUVs family during UDT 2015REMUS family of AUVs developed by KONGSBERG

REMUS - Remote Environmental Measuring UnitS 100 is a compact, light-weight, Autonomous Underwater Vehicle - AUV designed for operation in coastal environments up to 100 meters in depth. The REMUS 100 AUV can be configured to include a wide variety of standard and/or customer specified sensors and system options to meet your unique autonomous mission requirements.

The capabilities of the REMUS 100 make it ideally suitable for marine research, defense, hydrographic and offshore/energy markets. The vehicle is small enough to be carried by two people, yet contains enough sophisticated sensor, navigation, and power resources to enable it to perform intricate sonar and oceanographic surveys over large areas. REMUS 100 is in service in a lot of navies around the world.
KONGSBERG is showcasing REMUS AUVs family during UDT 2015The REMUS 100 a compact light-weight Autonomous Underwater Vehicle

The REMUS 600-S (Survey) is equipped with a Kongsberg EM 2040 Multibeam Echosounder (MBES) along with NavP and NavLab which will allow its operator to collect high resolution, IHO quality bathymetric data with unmatched navigational accuracy in shallow water.

The REMUS technology provides the operator with absolute confidence in performing completely autonomous operations with high levels of data assurance and accuracy. The REMUS 600-S vehicle has long endurance capability and increased payload capacity compared to other AUVs. The vehicle also has a full suite of communications options including Iridium, Wi-Fi, and acoustic communications. An emergency communication system is also included that powers the GPS, Iridium, and the acoustic transponder in the event of a failure or power loss.
KONGSBERG is showcasing REMUS AUVs family during UDT 2015REMUS 600-S is an AUV specifically designed for survey applications - 600 m and 1500 meter configurations available

REMUS 6000 is the deepest member of KONGSBERG's family of Autonomous Underwater Vehicles. The REMUS 6000 AUV was designed under a cooperative program involving the Naval Oceanographic Office, the Office of Naval Research, and the Woods Hole Oceanographic Institution - WHOI, in support of deep-water autonomous operations. The REMUS 6000 AUV boasts the same proven software and electronic subsystems found in our highly successful REMUS 100 AUV, with a depth rating, endurance, and payload that allow for autonomous operations in up to 6000 meters of water.

The REMUS 6000 has been designed to enable operations to water depths as great as 6000 meters. The versatile design also allows long mission durations in shallow littoral areas. The REMUS 6000 can be configured to include a wide range of customer specified sensors. The sensor suite can be reconfigurable and enables the REMUS 6000 to be configured to meet specific, and varied, mission requirements.

The REMUS 6000 incorporates the same proven Vehicle Interface Program (VIP) used in the complete family of REMUS vehicles. The highly refined VIP makes vehicle maintenance, checkout, mission planning, and data analysis fast and easy. Windows operation, quick look indicators, quality control checks, and a sophisticated data export capability all add to the user friendly nature of this software package.
KONGSBERG is showcasing REMUS AUVs family during UDT 2015The REMUS 6000 a versatile Autonomous Underwater Vehicle depth rated to 6000 meters
Copyright © 2019 - 2024 Army Recognition | Webdesign by Zzam